4E1/8E1/16E1 PDH Multiplexer with 100M ethernet

Detailed Product Description

Function:

4E1/8E1/16E1 PDH multiplexer with 100M ethernet can multiplex 4 E1/8E1/16E1 and 10/100M ethernet signals for transmission over an optical fiber, resulting in reaching a longer distance without a repeaters and superior performance compared to copper media.

Product Description:
4E1/8E1/16E1 fiber optical multiplexer is the 4E1/8E1/16E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 4E1/8E1/16E1. The outer design use the standard 19 inches rack, so the volume is little, weight is light and operation is convenient and credit.
4E1/8E1/6E1 fiber optical multiplexer, is use the PDH fiber transmission technologies. The 2M (E1) interfaces can connect with the exchanger, light loop device and multi-diplexer directly to form the mircomidi or the special network. Complete alarm function for 4E1/8E1/16E1, it is stable and easy to maintenance, install and small in size. It has one digital service telephone.

Features:

• Offer 4 /8/16 X 2Mb/s digital interfaces
• Offer one 10/100M Ethernet channel for option
• The supervisory control interface implements centralized monitoring and export the monitor and control information of this port and opposite port.
• One link to service telephone for duty contract
• 220VAC & -48VDC power options and the positive and negative of DC-48V can be optional because there is the self-test circuit for the polarity inside th1e device
• Standard 19/9.5 inches rack, little volume, light weight, steady capacity and convenient setup
• Digital clock recovery circuit and digital smooth DPLL adopted for 2.048Mb/s port
• LED indicators
• Has 1+1 fiber protection for optional
• Power supply redundancy : AC220 and DC-48V or DC-24V combination

Optical interface    
Optical wavelength: 850nm/1310nm for multi- mode optical interface,
1310nm/1550nm for single-mode optic interface
Optical interface: SC/FC
Receiving and dispatching module: >-6dBm
Optical receiver receiving sensitivity <-36 (BER<10):
Dynamic range receiving: >-30dB
Transmitting range: Multi-mode 2 Km, single-mode 40Km, single-mode 60 Km, single-mode 120Km
Vibration characteristic: Satisfies G.742 and the G.823 standard
E1 interface   
Interface code: HDB3 code
Line speed: 2.048Mbp/S 50ppm
Interface standard: ITU-T G 703
Interface impedance: 75ohm/unbalanced or 120ohm/ balanced
Interface characteristic: supports rack (19 inches, 6U high), can reach up to 24 directions
10/100M Base-T interface:
Interface rate:10/100Mbps
Interface characteristic: satisfies IEEE802.3, IEEE802.1Q
Connector: RJ45

Order information:
BD-OP-4E1-ETH-A      AC220V
BD-OP-4E1-ETH-D      DC-48V
BD-OP-8E1-ETH-A      AC220V
BD-OP-8E1-ETH-D      DC-48V
BD-OP-16E1-ETH-A    AC220V
BD-OP-16E1-ETH-D    DC-48V